Chinese ∷  English

Products

  • Fiber  Fusion Splicer
  • Fiber  Fusion Splicer
Fiber  Fusion Splicer Fiber  Fusion Splicer

Fiber Fusion Splicer

  • Industrial standard screen
  • Various colors are available
  • Core to core digital alignment
  • 8s splicing stime, 26s tube heating time
  • Product description:
  • INQUIRY

Handheld, Small, Light

Industrial standard screen

Various colors are available

Core to core digital alignment

8s splicing stime, 26s tube heating time

5800mAh and pluggable Li-battery, Typical 200 cycles

ARC calibrated by temperature and air pressure automatically

Automatically switching on windshield and heater in 4 steps

Apply to bare fibers, indoor cables and jumper wires splicing




Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150μm, Coating diameter: 160 ? 900μm
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery


No previous NEXT:WDM